WISECOM, INC.

WS-5614JS3/ES3 (EXTERNAL)

Card Type                        Modem
Chip Set                         Unidentified
I/O Options                      Line out, line in, 25-pin DTE port,
                                 speaker out, microphone in, power
Maximum Modem Rate               56Kbps
Maximum Fax Rate                 14.4Kbps
Data Modulation Protocol         Bell 103/212A

                                 ITU-T V.22, V.22bis, V.32, V.32bis, V.34,
                                 56Kflex
Fax Modulation Protocol          ITU-T V.17, V.21 CH.2, V.27ter, V.29
Error Correction/Compression     MNP5, V.42, V.42bis
Fax Class                        Class I
Data Bus                         External

[Image]

                                CONNECTIONS

        Function           Label             Function              Label

  Line out (RJ-11)              CN1      Power                      CN4

  Line in (RJ-11)               CN2      Speaker out                CN5

  25-pin DTE port               CN3      Microphone in              CN6

                             DIAGNOSTIC LED(S)

   LED         Color         Status                 Condition

   MR      Unidentified        On                  Power is on

   MR      Unidentified       Off                 Power is off

   TR      Unidentified        On              DTR signal is high

   TR      Unidentified       Off               DTR signal is low

     SD        Unidentified      On         Modem is transmitting data

     SD        Unidentified     Off       Modem is not transmitting data

     RD        Unidentified      On          Modem is receiving data

     RD        Unidentified     Off        Modem is not receiving data

     OH        Unidentified      On             Modem is off hook

     OH        Unidentified     Off              Modem is on hook

   CD      Unidentified        On        Carrier signal detected or error
                                        correction negotiation completed

   CD      Unidentified       Off          Carrier signal not detected

   RS      Unidentified        On              RTS signal is high

   RS      Unidentified       Off               RTS signal is low

   CS      Unidentified        On              CTS signal is high

   CS      Unidentified       Off               CTS signal is low



                           SUPPORTED COMMAND SET

                             Basic AT Commands

  AT, ‘+++’, A/

  A, B, E, H, V

  &C, &M, &P, &T, &V, &W, &X, &Y, &Z

                           Extended AT Commands

  %C, %E, %L, %Q

  \A, \B, \K, \N

                             Special Commands



                                S Registers

  S0, S1, S2, S3, S4, S5, S6, S7, S8, S9,S10, S11, S12, S14, S16, S18,
  S21, S22, S23, S24, S25

  S26, S27, S29, S30, S31, S32, S33, S36, S37, S38, S39, S40, S41, S46,
  S48, S82, S91, S92, S95

  Note: See MHI Help File for full command documentation.

                         PROPRIETARY AT COMMAND SET

  For a full command summary, see WISECOM, INC. WS-5614JS3/ES3 (INTERNAL)